Psion Teklogix PrintAbout MP2000 Spécifications télécharger pdf (Page 13)

Printek Emulation

Double High/Wide On DC2 D

Enables double high/wide printing.

This command causes all characters on the current line to printed double high and double wide.

Control Code DC2 D

Hexadecimal: 12 44

Double High/Wide Off DC2 d

Disables double high/wide printing.

This command cancels double high/wide printing for the current line.

Control Code DC2 d

Hexadecimal: 12 64

Set Text Line Spacing ESC a n

Sets the number of dot rows the paper is to be moved after printing each row of text. Each dot row is 0.125mm.

0 ≤ n ≤ 10.

Example: The following escape sequence sets the line spacing to zero (as needed when printing line drawing

characters when the PC Line Drawing character set is selected).

Escape Sequence: ESC a 0

Hexadecimal: 1B 61 00

Character Attributes

Select Emphasized Mode ESC U n

Selects emphasized printing mode. Emphasized mode may be used to highlight text by giving it a more bold

appearance.

Selection

0 Emphasized Mode Off

1 Emphasized Mode On

This command must be sent prior to any printable characters on the line. If sent after printable characters are

received, a Carriage Return and Line Feed will be inserted and a new line started before the command takes

effect.

Example: The following escape sequence will set emphasized printing mode to On.

Escape Sequence: ESC U 1

Hexadecimal: 1B 55 31

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 60 61

Pas de commentaire

Psion Teklogix PrintAbout MP2000 Spécifications Page 13