Psion Teklogix PowerScan M8300 Manuel d'utilisateur télécharger pdf (Page 9)

Charging the Batteries

Quick Reference Guide 3

Charging the Batteries

Once the BC-80X0/C-8000 is powered, you can charge the reader's

batteries.

Place the PowerScan

™

M8300 into the BC-80X0 cradle or the C-8000

battery charger. The "Reader" LED on the cradle/battery charger turns

red.

The battery is completely charged when the "Reader" LED on the

cradle/battery charger turns green.

To change the batteries, unscrew the retaining screw and extract the

battery pack from the reader handle. Then, insert the new battery pack

into the reader handle and tighten the screw. (See the following

figures).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Pas de commentaire

Psion Teklogix PowerScan M8300 Manuel d'utilisateur Page 9