Psion Teklogix PowerScan M8300 Manuel d'utilisateur télécharger pdf (Page 13)

PowerScan™ M8300 Configuration

Quick Reference Guide 7

END OF PROCEDURE. YOUR READER IS NOW READY TO READ

CODES.

7. Read the Bind code to pair the PowerScan

™

M8300 to the BC-

80X0 cradle.

The reader is dedicated to the cradle. Any previously bound

reader will be excluded.

To connect several readers to the same cradle see the following

section "Using Multiple Readers with Same Cradle".

Bind

Ì$+RN0$-IÎ

The green LED on the PowerScan

™

M8300 will blink: the reader is

ready to be positioned onto the cradle.

8. Firmly position the reader onto the cradle. Within 10 seconds, a

beep will be emitted, signaling that the BC-80X0 cradle has been

paired to the PowerScan

™

M8300, and the green LED on the

reader will go off.

Configure the BC-80X0 cradle. Refer to the “BC-80X0 Quick

Reference Guide”.

Green LED

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Pas de commentaire

Psion Teklogix PowerScan M8300 Manuel d'utilisateur Page 13