Psion Teklogix 7527 C Manuel d'utilisateur télécharger pdf (Page 19)

Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 15

If the touchscreen has never been calibrated or if the stylus pointer is

not accurate when you tap on an item:

• In the

Control Panel,

choose the

Stylus

icon, select the

Calibration

tab, and then tap on the

button.

• Follow the onscreen directions to calibrate the display.

2.5 Indicators

WORKABOUT PROs use an LED (Light Emitting Diode),

onscreen messages and audio tones as indicators.

2.5.1 The LED

A single, two-coloured LED is located on the left side of the unit,

just above the <BKSP> key. When you press <ENTER/ON>, the

LED ﬂashes green to indicate that the unit has been powered up. The

LED table below outlines the behaviour of the LED while the unit is

docked in a charger.

Keep in mind that the application running on the WORKABOUT

PRO can dictate how the LED operates. Review the documentation

provided with the application to determine LED behaviour.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Pas de commentaire

Psion Teklogix 7527 C Manuel d'utilisateur Page 19