Psion Teklogix ISO 9001 Manuel d'utilisateur télécharger pdf (Page 20)

Chapter 2: Hardware Information

Maintaining the NEO IP and Drop-Test Ratings

12 Psion Teklogix NEO HDK User Manual

2.5 Maintaining the NEO IP and Drop-Test Ratings

NEO has been designed and tested to meet IP54 and a 4´ drop rating to polished concrete (a

total of 26 drops to include all corners, edges and faces). In some environments, it may be

beneficial to use the Protective Rubber Boot (PX3062) to extend the product’s durability.

Developers should ensure that any add-on peripherals are designed to achieve the required

IP rating necessary for the intended usage environment, and to match the drop-test rating of

the NEO alone.

2.6 Mechanical Description of the NEO Case and Anchor Points

The lower case of the NEO is made of injection-moulded Lexan EXL 9134 polycarbonate

plastic, colour 7B5003 grey (as defined by Sabic/GE). The plastic texture is VDI 27.

Devices can be anchored to four threaded inserts (insert size M2 x 4), or snapped into place

using the mounting slots located forward (2) and rear (1) on the unit. Exact locations and di-

mensions of the mounting points, and their positions in relation to the expansion port

connector pads, can be found in the CAD file neo_housing_and_bracket_asm.igs.

Note: The Expansion Connector Cover on the rear of the product is not required to achieve

the IP54 rating.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Pas de commentaire

Psion Teklogix ISO 9001 Manuel d'utilisateur Page 20