Psion Teklogix PowerScan M8300 Manuel d'utilisateur télécharger pdf (Page 14)

PSION

8PowerScan™ M8300

Applying Rapid Point-to-Point Configuration Label (Optional)

System Connections

The BC-80X0 cradle provides two interface connectors and a power

supply connector as shown in the figure below:

The RS-485 Network connection is available only on BC-8060 models.

For details about this type of connection, refer to the PowerScan™

D8330/M8300 User Manual.

To connect the BC-80X0 cradle to the Host through the multi-interface

connector, use the cable corresponding to the desired interface type.

A pre-printed bar code label is included

in the package for rapid configuration of

point-to-point applications. If you wish

to use this method, apply this label to

the seat provided on the BC-80X0

cradle as shown in the figure. See the

PowerScan™ M8300 Quick Reference

Guide for the configuration procedure.

Connections should always be made with power off!

CAUTION

Power

Supply

RS-485

(BC-8060 only)

MULTI-INTERFACE

RS-232, USB, Wedge, PEN

Emulation

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Pas de commentaire

Psion Teklogix PowerScan M8300 Manuel d'utilisateur Page 14